Narrow bends or bends with long leg length
A particular strength of the Stierli-Bieger horizontal bending machine is bending difficult or narrow bends or bends with a long leg length.
In addition to standard small and flexible acute punches for narrow bends, we can make special punches for you to solve specific bending tasks.
Acute punch for tight U-bends
This area is currently under construction. Further informations will follow soon.
Bending narrow-sided parts
Narrow bends can be bent with an “acute punch”. Depending on the ration of the bending punch cross-section and its height, an additional support may be required at the top. Bending of tight bends is a strength of the Stierli horizontal bending machine.
Bending with support (narrow bends)
This area is currently under construction. Further informations will follow soon.
Bending long lengths with the BZ-2200 special bending centre
The BZ-2200 bending centre is part of our machine range and is able to bend very long parts horizontally, with a sheet width (sheet height) up to 1 m. This bending centre can solve difficult special bending tasks. This bending centre is ideal for bending long lengths.
17 Article
Product comparison added Product comparison added Go to product comparison
Product was already added The product was already added. Please add another product or go to the Product comparison
Product comparison added The product has been added to the comparison. Please add at least one more product to start the product comparison.
| Working power | 8.5 to / 85 kN |
|---|---|
| Tooling height | 100 mm / 4" (inch) |
| Bending capacity flat | 100 / 10 mm |
| Round bar | ø 20 mm |
| Control | Manual control |
| Working power | 12 to / 120 kN |
|---|---|
| Tooling height | 130 mm / 5" (inch) |
| Bending capacity flat | 130 / 12 mm |
| Straightening capacity | light straightening work |
| Pipe bending | 3/8" - 1 ½" |
| Round bar | ø 25 mm |
| Control | Manual control |
| Working power | 12 to / 120 kN |
|---|---|
| Tooling height | 130 mm / 5" (inch) |
| Bending capacity flat | 130 / 12 mm |
| Straightening capacity | light straightening work |
| Pipe bending | 3/8" - 1.5" |
| Round bar | ø 25 mm |
| Control | CNC Control |
| Working power | 22 to / 220 kN |
|---|---|
| Tooling height | 130 mm / 5.11" (inch) |
| Bending capacity flat | 130 / 16 mm |
| Straightening capacity | HEB 100 |
| Pipe bending | 3/8" - 1 ½" |
| Round bar | ø 30-35 mm |
| Control | NC control |
| Working power | 22 to / 220 kN |
|---|---|
| Tooling height | 130 mm / 4.72" (inch) |
| Bending capacity flat | 130 x 16 mm |
| Straightening capacity | HEB 100 |
| Pipe bending | 3/8" - 1 ½" |
| Round bar | ø 35 mm |
| Control | CNC Control |
| Working power | 22 to / 220 kN |
|---|---|
| Tooling height | 130 mm / 5" (inch) |
| Bending capacity flat | 130 / 16 mm (150/16) |
| Control | CNC Control |
| Working power | 42 to / 420 kN |
|---|---|
| Tooling height | 200 mm / 7.87" (inch) |
| Bending capacity flat | 200 / 20 mm |
| Straightening capacity | HEA 180 |
| Pipe bending | 3/8" - 2" (60.3mm) |
| Round bar | ø 40 mm |
| Control | Manual control |
| Typical applications | Metalwork shop / metal construction for bending and straightening |
| Working power | 22 to / 220 kN |
|---|---|
| Tooling height | 130 mm / 5" (inch) |
| Bending capacity flat | 150 / 16 mm |
| Control | CNC Control |
| Speciality | Das Top-Modell zum Stromschienen fertigen |
| Working power | 42 to / 420 kN |
|---|---|
| Tooling height | 200 mm / 7.87" (inch) |
| Bending capacity flat | 200 / 20 mm |
| Straightening capacity | HEA 180 |
| Pipe bending | 3/8" - 1 ½" |
| Round bar | ø 35 mm |
| Control | CNC Control |
| Working power | 42 to / 420 kN |
|---|---|
| Tooling height | 200 mm / 7.87" (inch) |
| Bending capacity flat | 200 / 20 mm |
| Control | CNC Control |
| Working power | 42 to / 420 kN |
|---|---|
| Tooling height | 200 mm / 7.87" (inch) |
| Bending capacity flat | 200 / 20 mm |
| Control | CNC Control |
| Speciality | Das Top-Modell zum Stromschienen fertigen |
| Working power | 82 to / 820 kN |
|---|---|
| Tooling height | 300 mm / 11.81" (inch) |
| Bending capacity flat | 300 / 20 (30) mm |
| Straightening capacity | HEA 260 |
| Pipe bending | 3/8" - 3" |
| Round bar | ø 60 mm |
| Control | Manual control |
| Typical applications | Metal construction, strong universal bending machine |
| Working power | 82 to / 820 kN |
|---|---|
| Tooling height | 300 mm / 11.81" (inch) |
| Bending capacity flat | 300 / 20 (30) mm |
| Straightening capacity | HEA 260 |
| Pipe bending | 3/8" - 3" |
| Round bar | ø 60 mm |
| Control | CNC Control |
| Working power | 82 to / 820 kN |
|---|---|
| Tooling height | 300 mm / 11.8" (inch) |
| Bending capacity flat | 300 / 20 (30) mm |
| Pipe bending | 3/8" - 3.0" |
| Control | CNC Control |
| Working power | 82 to / 820 kN |
|---|---|
| Tooling height | 250 mm / 9.84" (inch) |
| Bending capacity flat | 300 / 20 mm |
| Control | CNC Control |
| Speciality | Das Top-Modell zum Stromschienen fertigen |
| Working power | 130 to / 1300 kN |
|---|---|
| Tooling height | 300 mm / 11.81" (inch) |
| Bending capacity flat | 300 / 30 (40) mm |
| Straightening capacity | HEB 300 |
| Pipe bending | 3/8" - 3" |
| Control | Manual control |
| Typical applications | Metal construction, strong universal bending machine |
| Working power | 130 to / 1300 kN |
|---|---|
| Tooling height | 300 mm / 11.81" (inch) |
| Bending capacity flat | 300 / 30 (40) mm |
| Straightening capacity | HEB 300 |
| Pipe bending | 3/8" - 3" |
| Control | CNC Control |
