Wind power system
We have designed a special system for the wind power industry that can bend very thick flat steel. Steel cross-sections up to 250x100 mm (S355) or 400x60 mm can be bent with it.
These steel cross-sections are used for oval or slotted door reinforcement frames, rings or manhole openings for wind towers.
What are the dimensions of the material you bend?
With our many years of experience and modern development department, we can make bending machines to meet your requirements.
21 Article
Product comparison added Product comparison added Go to product comparison
Product was already added The product was already added. Please add another product or go to the Product comparison
Product comparison added The product has been added to the comparison. Please add at least one more product to start the product comparison.
| Working power | 82 to / 820 kN |
|---|---|
| Bending capacity flat | HP 200 |
| Pipe bending | 4" |
| Control | Manual control |
| Working power | 82 to / 820 kN |
|---|---|
| Bending capacity flat | HP 200 |
| Pipe bending | 4" |
| Control | NC control |
| Working power | 130 to / 1300 kN |
|---|---|
| Bending capacity flat | HP 280 |
| Pipe bending | 4" |
| Control | Manual control |
| Working power | 130 to / 1300 kN |
|---|---|
| Bending capacity flat | HP 280 |
| Pipe bending | 4" |
| Control | NC control |
| Working power | 220 to / 2200 kN |
|---|---|
| Bending capacity flat | HP 320 |
| Pipe bending | 4" |
| Control | Manual control |
| Working power | 330 to / 3300 kN |
|---|---|
| Bending capacity flat | HP 340 |
| Pipe bending | 4" |
| Control | Manual control |
| Working power | 330 to / 3300 kN |
|---|---|
| Bending capacity flat | HP 340 |
| Pipe bending | 4" |
| Control | NC control |
| Working power | 440 to / 4400 kN |
|---|---|
| Bending capacity flat | HP 430 |
| Pipe bending | 4" |
| Control | NC control |
| Working power | 440 to / 4400 kN |
|---|---|
| Bending capacity flat | HP 430 |
| Pipe bending | 4" |
| Control | Manual control |
| Working power | 220 to / 2200 kN |
|---|---|
| Tooling height | 600 mm / 23.62" (inch) |
| Straightening capacity | HEA/HEB 600 |
| Pipe bending | 4" |
| Working power | 220 to / 2200 kN |
|---|---|
| Tooling height | 600 mm / 23.62" (inch) |
| Straightening capacity | HEA/HEB 600 |
| Pipe bending | 4" |
| Control | NC control |
| Working power | 220 to / 2200 kN |
|---|---|
| Tooling height | 600 mm / 23.62" (inch) |
| Straightening capacity | HEA/HEB 600 |
| Pipe bending | 4" |
| Control | CNC Control |
| Working power | 330 to / 3300 kN |
|---|---|
| Tooling height | 850 mm / 33.46" (inch) |
| Straightening capacity | HEB 1000 |
| Pipe bending | 4" |
| Control | Manual control |
| Working power | 220 to / 2200 kN |
|---|---|
| Tooling height | 850 mm / 33.46" (inch) |
| Straightening capacity | HEB 1000 |
| Pipe bending | 4" |
| Control | CNC Control |
| Working power | 330 to / 3300 kN |
|---|---|
| Tooling height | 850 mm / 33.46" (inch) |
| Straightening capacity | HEB 1000 |
| Pipe bending | 4" |
| Control | NC control |
| Working power | 440 to / 4400 kN |
|---|---|
| Tooling height | 1050 mm / 41.33" (inch) |
| Straightening capacity | HEM 1000 |
| Pipe bending | 4" |
| Control | Manual control |
| Working power | 440 to / 4400 kN |
|---|---|
| Tooling height | 1050 mm / 43.33" (inch) |
| Straightening capacity | HEM 1000 |
| Pipe bending | 4" |
| Control | NC control |
| Working power | 440 to / 4400 kN |
|---|---|
| Tooling height | 1050 mm / 41.33" (inch) |
| Straightening capacity | HEM 1000 |
| Pipe bending | 4" |
| Control | CNC Control |
| Working power | 600 to / 6000 kN |
|---|---|
| Tooling height | 1050 mm / 41.33" (inch) |
| Pipe bending | 4" |
| Control | NC control |
| Working power | 880 to / 8800 kN |
|---|---|
| Tooling height | 1200 mm / 47.24" (inch) |
| Straightening capacity | HLR 1100 |
| Pipe bending | 4" |
| Control | NC control |
