Product information

Crane construction

Crane construction companies face the problem of welding usually very large and bulky crane components and then turning them.

With the Stierli ROTATOR, we offer you a safe, fast turning device for this application. With the Stierli ROTATOR, crane parts can be rotated safely through 360°. Welding can be carried out inside the Rotator. At the end of the welding process, the rotator can also be used for visual weld inspections.

We have first-class references from a customer who ordered 10 Stierli-Bieger ROTATORS for welding and turning telescopic arm booms (mobile pneumatic crane).

Our pipe bending machines are able to specialize on the following applications for example. If you need a special bending or straightening solution for your pipe project - it will be possible with Stierli Bieger probably.

Bending gas and water pipes

Gas and water pipes can be bent on the Stierli bending machine using standard pipe bending tools. A separate bending segment is used for every pipe size.

Along with pipes that meet DIN EN _______, railing pipes can also be bent without a mandrel. However, these pipes have a larger bending radius.

Bending of rustproof pipes is not possible. Such pipes must always be bent with a mandrel bending machine.

Bending gas pipes with the standard pipe bender is faster than a mandrel bending machine.

Bending rectangular/square pipes

Bending of rectangular or square pipes can be carried out with a special tool. In the process, the tube is compressed slightly inside so that the material can flow.

This pipe bending procedure is very economical and faster than a mandrel bending machine.

American pipe bend

When bending square or rectangular pipes, the inside is compressed slightly so that the material can flow in a controlled way. This is also known as an "American pipe bend".

This procedure is often used when such pipes require cost-effective bending. An expensive mandrel bending machine is therefore not required and the bending process is also faster.

Flattening pipes

Pipes can be flattened in metal or steel construction. Flattened pipes can be used to make struts, for example.

Bending heavy large pipe diameters up to 400 mm

3-roller bending machines for the larger range of diameters are very expensive or are not even made by 3-roller bending machine manufacturers.

If the bending radius does not have to be too small, a pipe such as this can also be bent step by step with the Stierli bending press.

Larger diameters > 400 mm on request.

Folding pipes

We have created bending solutions for folding pipes in metal and steel construction. Time-consuming sawing and welding work can be saved as a result.

Pipe draw bending process

Thinner pipes and smaller radii can be bent than on the standard pipe bending machine (pipe pressure bending process). The pipe draw bending process has a few more possible applications than the pressure bending process.