Product comparison added Product comparison added Go to product comparison
Product was already added The product was already added. Please add another product or go to the Product comparison
Product comparison added The product has been added to the comparison. Please add at least one more product to start the product comparison.
220 HE horizontal bending and straightening machine
The central bending pin holder is reinforced by a hardened steel bushing. Three further holes are for the plug-in pins of the pipe bending or straightening tools. The very large working plate ensures effective positioning of very large bent parts.
The special oil-lubricated guided cylinder requires no maintenance! The working pressure of 220 kN is delivered with the full stroke length of 200 mm and at full operating speed. The stroke limitation operates electro-hydraulically with the tried and tested Stierli switch-off system with Vernier scale and 0 mark. It is operated with the foot switch or the special manual control cable, with which jogging mode, automatic mode and the straightening function can be actuated.
The machine can be transported easily inside the factory with a crane or pallet truck. Two tool trays provide organised storage of the tools so that they are always to hand. Please also note the wide range of tools!
| Working power | 82 to / 820 kN |
|---|---|
| Tooling height | 300 mm / 11.8" (inch) |
| Bending capacity flat | 300 / 20 (30) mm |
| Pipe bending | 3/8" - 3.0" |
| Control | CNC Control |
| Working power | 42 to / 420 kN |
|---|---|
| Tooling height | 200 mm / 7.87" (inch) |
| Bending capacity flat | 200 / 20 mm |
| Straightening capacity | HEA 180 |
| Pipe bending | 3/8" - 1 ½" |
| Round bar | ø 35 mm |
| Control | CNC Control |
| Working power | 42 to / 420 kN |
|---|---|
| Tooling height | 200 mm / 7.87" (inch) |
| Bending capacity flat | 200 / 20 mm |
| Control | CNC Control |
| Working power | 22 to / 220 kN |
|---|---|
| Tooling height | 130 mm / 5" (inch) |
| Bending capacity flat | 150 / 16 mm |
| Control | CNC Control |
| Speciality | Das Top-Modell zum Stromschienen fertigen |
| Working power | 22 to / 220 kN |
|---|---|
| Tooling height | 130 mm / 5" (inch) |
| Bending capacity flat | 130 / 16 mm (150/16) |
| Control | CNC Control |
| Working power | 42 to / 420 kN |
|---|---|
| Tooling height | 200 mm / 7.87" (inch) |
| Bending capacity flat | 200 / 20 mm |
| Control | CNC Control |
| Speciality | Das Top-Modell zum Stromschienen fertigen |
| Working power | 22 to / 220 kN |
|---|---|
| Tooling height | 130 mm / 4.72" (inch) |
| Bending capacity flat | 130 x 16 mm |
| Straightening capacity | HEB 100 |
| Pipe bending | 3/8" - 1 ½" |
| Round bar | ø 35 mm |
| Control | CNC Control |
| Working power | 82 to / 820 kN |
|---|---|
| Tooling height | 300 mm / 11.81" (inch) |
| Bending capacity flat | 300 / 20 (30) mm |
| Straightening capacity | HEA 260 |
| Pipe bending | 3/8" - 3" |
| Round bar | ø 60 mm |
| Control | CNC Control |
| Working power | 82 to / 820 kN |
|---|---|
| Tooling height | 250 mm / 9.84" (inch) |
| Bending capacity flat | 300 / 20 mm |
| Control | CNC Control |
| Speciality | Das Top-Modell zum Stromschienen fertigen |
| Working power | 130 to / 1300 kN |
|---|---|
| Tooling height | 300 mm / 11.81" (inch) |
| Bending capacity flat | 300 / 30 (40) mm |
| Straightening capacity | HEB 300 |
| Pipe bending | 3/8" - 3" |
| Control | CNC Control |
| Working power | 12 to / 120 kN |
|---|---|
| Tooling height | 130 mm / 5" (inch) |
| Bending capacity flat | 130 / 12 mm |
| Straightening capacity | light straightening work |
| Pipe bending | 3/8" - 1 ½" |
| Round bar | ø 25 mm |
| Control | Manual control |
