Product comparison added Product comparison added Go to product comparison
Product was already added The product was already added. Please add another product or go to the Product comparison
Product comparison added The product has been added to the comparison. Please add at least one more product to start the product comparison.
820 CNC-W Hybrid horizontal bending centre
The material-related spring back is calculated from bending tables which are saved in the control system and can be adapted or extended as required. In addition, the length before bending and the stop positions are calculated automatically. You can save 100,000 programs with 20 different bends each. Fast and fine speeds are already set in both axes. The 200 mm tool holder and the strong pin with a diameter of 80 mm enables versatile use and easy fitting of simple tools. Tools that can be changed easily and quickly are used for bending.
The very large working plate ensures effective positioning of very large bent parts. The special oil-lubricated guided cylinder requires no maintenance and no open guide! The foot pedal is used to start the bending operation.
| Working power | 130 to / 1300 kN |
|---|---|
| Tooling height | 300 mm / 11.81" (inch) |
| Bending capacity flat | 300 / 30 (40) mm |
| Straightening capacity | HEB 300 |
| Pipe bending | 3/8" - 3" |
| Control | CNC Control |
| Working power | 22 to / 220 kN |
|---|---|
| Tooling height | 130 mm / 4.72" (inch) |
| Bending capacity flat | 130 x 16 mm |
| Straightening capacity | HEB 100 |
| Pipe bending | 3/8" - 1 ½" |
| Round bar | ø 35 mm |
| Control | CNC Control |
| Working power | 82 to / 820 kN |
|---|---|
| Tooling height | 300 mm / 11.81" (inch) |
| Bending capacity flat | 300 / 20 (30) mm |
| Straightening capacity | HEA 260 |
| Pipe bending | 3/8" - 3" |
| Round bar | ø 60 mm |
| Control | CNC Control |
| Working power | 42 to / 420 kN |
|---|---|
| Tooling height | 200 mm / 7.87" (inch) |
| Bending capacity flat | 200 / 20 mm |
| Straightening capacity | HEA 180 |
| Pipe bending | 3/8" - 1 ½" |
| Round bar | ø 35 mm |
| Control | CNC Control |
